Programmer UPROG ST
When buying a programmer, you can raise to a higher state Uprog version without buying a new programmer
Supports 31212 chips
Programmer UPROG ST
Basic functions of programmer UPROG
Programmer Uprog ST is a universal programmer to handle basic programmable systems. This is a newer version of programmer Uprog48. The programmer allows faster programming through the use of specialized microprocessor cycle rozkazowym 20 ns. It can handle systems dil Enclosed dill 48 nóżkowych. All thanks to a 48 pin-driver it. The programmer can handle systems from 48 feet. There are possibility to use any adapter to systems in other housings
Programmer
Technical data of UPROG ST
- shortened development time by using a specialized microprocessor with a cycle of 20 ns
- built-in connector for in-system programming (ICP )
- 100 % universal bases. Each pin is capable of independent modulation by VPP : 0 – 30V, VCC : 0.8 -8V , CLK : ~ 360Hz – 24MHz , GND
- programming systems in DIL without additional adapters
- family supported systems : EPROM , EEPROM, Flash microcontrollers
- simulator memory 8-bit (optional)
- simulator memory 16-bit (optional)
- simulator memory (SPI option)
- programmer is equipped with a data management system versions
- Ulogic – logic analyzer with digital waveform generator function ( pattern generator ) (optional )
- colored LEDs LEDs: Power, Busy , Error , Good
- Adapter Creator feature allows you to work with any manufacturer’s adapter
- Pin Check function checking the correct contact legs
- power switch
- software for Windows 2000/XP/Vista / Win7/Win8 systems (32 and 64 bit ) support multiple programmers simultaneously
- support basic range of programmable devices in enclosures to 48 feet
Programmer UPROG
Function Adapter Creator .
When buying a programmer Uprog to it, you can use adapters of any manufacturer in enclosures other than DIP. Moreover, using the adapter Creator, you can define structures or scan with the probe adapter. In a simple way, you can know the structure of the adapter without having to use the meter if the schema. Structures you can save to a file
Programmer UPROG
In-circuit programming, ICP.
Uprog was equipped with a 14 pin connector which allows you to program chips in the system (called in-circuit programming). Programatror is compatible with the type of interfaces: SPI, I2C, BDM, JTAG, 1 WIRE, 3 WIRE, and other types of interface’ów occurring in systems such as: 8051, AVR, ST72, PIC, MSP430, CPLD Xilinx / Altera and others. Placement of ICP connector in the front panel of the cabinet for easy access to the programmable system.
ISP connector allows you to power programmed by our system programmer, very fast data transfer, circuit protection, adjustable level programming interface and programming voltages in the range: Vcc 1.8V – 5V pp 5V – 14V
Programmer UPROG
Data Management system
With the software Uprog2 will be able to create a project with several different sets of data for each of the systems. Furthermore, the pack will be able to join the state descriptions – relating to the specific version or attach a note, which describe the state assembly instructions
Programmer UPROG
Memory programming times by UPROG ST
Device | Size | Programming | Read, Verification |
K9F1G08U0A | 1Gbit | 95s | 85s |
M29W800DB | 8Mbit | 11s (P+V)* | 2s |
AM29F040B | 4Mbit | 12s (P+V)* | 2s |
AT25F4096 | 4Mbit | 16s | 2s |
29DL64DF | 64Mbit | 58s (P+V)* | 8,5s |
* -Programming algorithm includes verification List of systems
Programmer UPROG
Pin Check function
Using the built-in programmer Uprog can państtwo validate the contact between the system and stand Uprog. In addition, the system detects a reverse insertion into the cradle, which in many cases ends up damaging the system or a programmable timer. This feature is particularly important when programming the single programming systems, or systems with a large number of terminals, where no contact on one of the legs is very difficult to find and often prevents the correct programming of the.
Perform functions PinCheck causes the Uprog automatically tests whether individual chip feet snugly with base programmer. Not contacting legs are indicated by a red arrow. Uprog detects reverse insertion into the base of the programmer. The user sees this as an intended not to display all legs in red.