Power Supply KD3005P

Stabilized power supply with programmable memory and continuously variable voltage in the range of 0 to 30V and the current control fluid in the range of 0-5A.

  • has surge protection and Overload.
  • Power has 5 memory to store the current, voltage and power supply modes.
  • only fully adjustable AC current, not its limitations.
  • power supply has the accuracy of the current to 3 decimal places!
  • KA3005P is cooled by a fan, which works non-stop, and its speed is dependent on the load.

KD3005P Power Laboratory is fan cooled

 

It works non-stop and the speed is dependent on the load


Regulation

      • on and off the power supply.
      • 4 Memory buttons (save, load)
      • Coarse and fine voltage adjustment
      • Coarse and fine adjustment of the intensity
      • control via software by
      • Keylock functionUSB
      • Infinitely adjustable voltage over the range of
      • Infinitely adjustable intensity across the entire range

Modes:

      • C.V. – Fixed output voltage
      •  
      • C. C. – Constant current load

Ochrona:

    • OVP – Overvoltage
    •  
    • OCP – against overload

The power supply can operate in the following modes: CV – Constant output voltage and C. C. constant current load. With two possible security OVP (overvoltage protection) and OCP (overload protection)

Application of Power Supply KD3005P

  • Industrial Institutes
  •  
  • Research Institutes
  •  
  • Lab Equipment
  •  
  • Electronic Industries
  •  
  • Electronic Services
  •  
  • Education and Education
  •  
  • Workshop hobbyists
  •  
  • Wherever required precision power supply

 

AC distinguished by its high precision LED displays to keep informing about the current voltage and load. Set the voltage and current in a very convenient way using the buttons to select an item to change and multi-turn potentiometer, which select the desired value.

Specifications of Laboratory Power Supply

  • voltage range: 0-30 V
  •  
  • current range: 0-5 A
    • Regulacja obciążenia:
    • Voltage: = < 0.01% +2 mV
    •  
    • Current: = < 0.1% +10 mA
    • Dokładność nastawienia parametrów:
    • Napięcia: 10 mV
    • Natężenia: 1 mA
    • setting accuracy 
    • voltages. 0.5% +20 mV
    •  
    • strengths. 0.5% +10 mA
    • Output ripple: 
    • Voltage: + 2mVrms
    •  
    • Intensity: + 3 mArms
    • Response time 
    • Ramp voltage: = < 100mS (Rated load 10%)
    •  
    • Acknowledge: = < 100mS (Rated load 10%

 

Set of Power Supply KD – 3005P includes :

 

  • Laboratory power KA-3005P KORAD
  • USB cable
  • wires to the power supply
  • Software ( to download Here )
  • Manual

Recently Viewed

  • Recently Viewed Products is a function which helps you keep track of your recent viewing history.
    Shop Now