Programmer BeeProg2

Universal Programmer USB / LPT memory, microcontrollers and PLDs. This allows systems to operate 82712

BeeProg 2 programmer Elnec company is an excellent choice for factories and businesses servicing the electronic devices

General information – BeeProg2 programmer

->BeeProg2 is a development programmer BeeProg +. A newer version is equipped with a highly efficient system FBGA. Provides higher programming speed (20-75%).

->Beeprog2 programmer may also be a tester logic TTL / CMOS memory. It allows users to create sequences of test patterns

->Built backing systems, which allows to eliminate damage to the programmer or would be. All inputs programmer BeeProg2 (including the ZIF socket, power supply or USB) are protected against ESD up to 15kV.

->There are adapters for systems in PLCC, JLCC, SOIC, SDIP, SOP, PSOP, SSOP, TSOP, TSOPII, TSSOP, QFP, PQFP, TQFP, VQFP, QFN (MLF), SON, BGA, EBGA, FBGA, VFBGA, uBGA, FTBGA, LAP, CSP, SCSP, LQFP, MQFP, HVQFN, QLP, QIP.

Część sprzętowa Beeprog2

->The programmer is equipped with an FBGA – With 48 pindriverami programmer allows you to call the states of H / L / pull up / pull down. Each of the pins can read the data. Pindrivery can actuate voltage from 1.8V level allowing us to serve a wide range of low-voltage systems

->BeeProg2 checks the correct placing in a zif socket (or has been placed in the correct place stand) and checks the quality of the connection between the legs and the seat base systems.

->Overcurrent protection and control byte signature to help prevent damage due to an error of use

->BeeProg2 selftest has features that allows you to zdiagnazowanie its technical condition.

->All inputs programmer BeeProg2 (including the ZIF socket, power supply or USB) are protected against ESD up to 15kV.

Programmer BeeProg2 software

-> Programmer is controlled through an easy-to-use software. The selection of the system can be made by the class, manufacturer, or type part of the catalog number of the system.

->The program supports all popular file formats. Files can recognize and convert automatically while loading the file.

->The software allows you to perform standard commands related to handling systems – (read, blank check, program, verify, erase), and has additional features: test (test whether the correct placement of the test signature byte), autoincrement, production mode (automatic start work after inserting the to stand)

->Autoincrement feature allows you to assign the programmed system to an individual serial number. It allows you to read from the file serial number or other identifying signature system

->The software provides basic information about the system (displays the available drawings of housings in which the system is dimensioned, part numbers are decoded systems (how the system in the name of the manufacturer writes its basic parameters)

->It provides information on the implementation of ISP (ISP pins for layout, wiring diagram and additional electronic components required for in-system programming)

->PG4UW program can also be controlled by an external application.

->The software allows you to connect several programmers BeeProg2 to one computer. We can program the system of multiple programming. It is a program of „”concurrent”” – each programmer works independently so you can program different layout.

->The software is only used certified algorithms or approved by system manufacturers. Individual algorithms are available on request for an additional fee.

->Free update software (algorithms) are available on a regular basis once every 4 weeks

->BeeProg2 programmer is universal and therefore support these new systems requires only a software update.

Programming time by BeeProg2

Device	Size	Operations	Time
Am29DL640G (parallel NOR Flash)	400080hx16 (64 Mega)	programowanie i weryfikacja	24 s
K8P6415UQB (parallel NOR Flash)	400100hx16 bit (64 Mega)	programowanie i weryfikacja	13 s
K9F1G08U0M (parallel NAND Flash)	8400000Hx8 (1 Giga)	programowanie i weryfikacja	122.7 s
QB25F640S33 (serial Flash)	800200hx8 (64 Mega)	programowanie i weryfikacja	30.7 s
AT89C51RD2 (microcontroller)	10000Hx8	programowanie i weryfikacja	14.4 s
PIC32MX360F512L (microcontroller)	80000hx8	programowanie i weryfikacja	16.2 s

Test Parameters: PC Pentium 4, 2.4 GHz, 512 MB RAM, USB 2.0 HS, Windows XP. Please note that Elnec programming speed tests using randomly created data pattern. Programming speed slightly depends on the speed of the PC. If the programmer is connected to the PC after the LPT port – programming may take a little longer.

Technical specification programmer BeeProg2

Unit of DAC’s

USB 2.0 high-speed – up to 480Mbit / s
electronics intelligence: powerful microprocessor and a state machine for FPGA
three converters D / A converters that produce regulated, independent power supply systems (VCCP, VPP1, VPP2) with a controlled rise time and fall slopes
VCCP range from 0 to 8V/1A
VPP1, VPP2 range from 0 to 26V/1A
built-in starter test and auto-calibration function

Socket zif i pin driver’y

Universal 48 pin DIL ZIF (Zero Insertion Force) for systems with a width of 300/600 mils, from 8 to 48 pins
48 universalych pin drivers
For each of the pin drivers can be independently connected voltage VCCP, VPP1 and VPP2
good grounding each of the pins
Drive capability of each of the 48 pins Logic: H, L, CLK, pull-up, pull-down
Full support for low voltage 1.8V already
ESD protection on each pin base (IEC1000-4-2: 15kV air, 8kV contact)
test: each pin is tested before every programming

Sockets ISP

20-pin male
6 pin drivers to provide TTL logic states: H, L, CLK, pull-up, pull-down. H level can be set between 1.8V .. 5V
1 x VCCP (range 2V..7V/100mA)
1 x VPP (range 2V..25V/50mA)
ESD protection on each pin base (IEC1000-4-2: 15kV air, 8kV contact)
2 outputs: working status LED OK and LED Error (active level: min 1.8V)
1 input, equivalent to the YES button! (active level: max 0.8V)

Programmer BeeProg2 includes:

Programmer BeeProg2
power Cable
Cable for connecting to a PC USB
ISPAdapter cable to the diagnostic test
Adapter for diagnostic test ISP interface
The cover protects against dust stand
documentation
CD with software

Chips programmed by programmer BeeProg2

In ZIF sockets

In ISP

Serial E(E)PROM: IIC series, MW series, SPI series, KEELOQ series, PLD configuration memories, UNI/O series
1-Wire E(E)PROM: DS1xxx, DS2xxx
Serial Flash: standard SPI (25xxx), DataFlash (AT45Dxxx, AT26Dxxx)
Microcontrollers Atmel: AT89Sxxx, AT90pwm, AT90can, AT90usb, AT90Sxxxx, ATtiny, ATmega, ATxmega, AT89LSxxx, AT89LPxxx
Microcontrollers Atmel AVR32: AT32UC3xxxx
Microcontrollers Chipcon (TI): CC11xx, CC24xx, CC25xx series
Microcontrollers Cypress: CY8C2xxxx
Microcontrollers Elan: EM78Pxxx, EM6xxx series
Microcontrollers EM Microelectronic: 4 and 8 bit series
Microcontrollers Microchip PICmicro: PIC10xxx, PIC12xxx, PIC16xxx, PIC17xxx, PIC18xxx, PIC24xxx, dsPIC, PIC32xxx series
Microcontrollers Mitsubishi: M16C
Microcontrollers Motorola/Freescale: HC08 (both 5-wire, All-wire), HC11, HC12, HCS08, S12, S12X, MC56F, MCF52 series
Microcontrollers Nordic Semiconductor: nRF24xxx
Microcontrollers NEC: uPD7xxx series
Microcontrollers Philips (NXP): LPC1xxx, LPC2xxx, LPCxx series, 89xxx series
Microcontrollers Renesas: R8C/Tiny series
Microcontrollers Realtek, M-Square
Microcontrollers Scenix (Ubicom): SXxxx series
Microcontrollers STM: ST7xxx, STR7xx, STR9xx, STM32Fxx, STM8A/S/L series
Microcontrollers Silicon Laboratories(Cygnal): C8051 series
Microcontrollers & Programmable System Memory STMicroelectronics: uPSD, PSD series
Microcontrollers TI: MSP430 (both JTAG and BSL series), MSC12xxx series
Microcontrollers ZILOG: Z8Fxxxx, Z8FMCxxxxx, Z16Fxxxx series, ZLF645x0xx
Various PLD (also by Jam/VME/SVF/STAPL/… Player/JTAG support):
Altera: MAX 3000A, MAX 7000A, MAX 7000B, MAX 7000S, MAX 9000, MAX II/G/Z
Xilinx: XC9500, XC9500XL, XC9500XV, CoolRunner XPLA3, CoolRunner-II
PLD Lattice: ispGAL22xV10x, ispLSI1xxxEA, ispLSI2xxxE, ispLSI2xxxV, ispLSI2xxxVE, ispLSI2xxxVL, M4-xx/xx, M4LV-xx/xx, M4A3-xx/xx, M4A5-xx/xx, LC4xxxB/C/V/ZC/ZE, ispCLOCK, Power Manager/II, ProcessorPM
FPGA: Actel: ProASIC3, IGLOO, Fusion
FPGA: Lattice: MachXO, LatticeXP, ispXPGA

BeeProg2